Structurally, the MacPherson strut suspension can be derived from the double wishbone suspension by merging the three points of the upper arm into a single point.
To achieve vertical wheel movement (wheel travel), the upper end of the strut allows both rotational freedom around this pivot and axial movement along the strut.
This axial motion is realized through the piston movement inside the strut, which also serves as the shock absorber.
Together with the lower control arm and tie rod, this configuration constrains five degrees of freedom, leaving only the wheel’s vertical movement unrestricted.
MacPherson strut suspensions are generally classified into three main types:
Conventional, Multi-link, and High-Performance configurations.
1. Conventional MacPherson Strut Suspension
(See Figure 1)
The conventional MacPherson strut design is widely used due to its simple structure, light weight, low cost, and compact packaging.
It provides a large kingpin offset and a high spring–damper leverage ratio, offering excellent space efficiency for transverse-engine front-wheel-drive (FWD) layouts.
Advantages:
- Fewer components → reduced mass and cost.
- Compact lateral layout and simple assembly.
- Good steering stability for front-wheel-drive applications.
Disadvantages:
- The vertical load on the tire induces side forces on the piston rod and guide bushing, increasing internal friction inside the strut.
- Limited geometry adjustability (camber and caster correction).
- Requires larger vertical packaging space, leading to higher hood lines and longer steering knuckles.
The strut tower receives loads from the damper, spring, and bump stop, and according to the load transmission path, it can be classified as single-channel, dual-channel, or triple-channel types.
In the dual-channel design (see Figure 2), the spring and bump-stop forces are transmitted directly to the body, while the damping force is delivered through the top-mount bushing to reduce noise and vibration.


2. Multi-Link MacPherson Strut Suspension
By splitting the lower control arm of the MacPherson suspension into two separate links, a multi-link MacPherson structure is formed.
The extended axes of these two links intersect at a virtual ball joint, creating a virtual steering axis (see Figure 3).
Advantages:
- Reduces the effective steering axis length, allowing for finer Ackermann steering geometry correction.
- The wheel hub and brake disc can be positioned closer to the vehicle’s centerline, improving balance and packaging.
Disadvantages:
- Adds one more ball joint, increasing both manufacturing cost and friction losses.
This structure is often used in premium compact cars and sports sedans, where better steering precision and reduced torque steer are desirable.

3. High-Performance MacPherson Strut Suspension
In 2010, General Motors introduced a high-performance MacPherson strut for its high-output luxury vehicles.
This design used a separate steering knuckle (spindle) to decouple the front-view geometry from the steering axis, as shown in Figure 4.
Advantages:
- Allows independent optimization of the kingpin inclination and caster angle, improving handling precision.
- Shorter steering axis reduces torque steer under high power.
- Modular design enables interchangeability with conventional MacPherson units on the same platform.
Disadvantages:
- Higher weight and cost due to the more complex spindle structure.
- May require additional packaging space, potentially increasing track width.
This layout is mainly adopted in high-performance front-wheel-drive vehicles where power delivery and steering control need to be balanced.

4. Other Evolved Forms of the MacPherson Strut
Several suspension types have evolved from the classic MacPherson design but are now less commonly used.
Although they all retain the strut structure, the way they constrain the wheel carrier (knuckle) differs.
These include variants with sliding pillars, guided links, and other experimental geometries (see Figure 5).

5. CHMODKINN Application
At CHMODKINN, we specialize in designing and manufacturing high-precision control arms and MacPherson strut components tailored for global automotive platforms.
Our expertise covers both conventional and multi-link MacPherson suspensions, offering adjustable control arms, forged aluminum lower arms, and high-performance strut top mounts.
Every product is developed through CNC precision machining, robotic welding, and durability testing to ensure superior geometry control, lightweight performance, and structural integrity.
Whether you are developing OEM front suspension systems or custom performance upgrades, CHMODKINN delivers engineering solutions that combine precision, reliability, and modular flexibility.
6. Further Reading
For a broader understanding of how different suspension systems function, check out our related article:
👉 Automotive Suspension Systems Explained: Independent vs Non-Independent
👉[Types of Double Wishbone Suspensions]
👉[Types of Torsion Beam Suspensions]
👉[Types of Multi-Link Suspensions]
👉[Principles for Selecting Suspension Types]
Looking to upgrade or customize your suspension system?
Visit our Performance Control Arm Product Page to explore CHMODKINN’s full range of adjustable control arms, camber/toe correction kits, and custom suspension assemblies—engineered for precision, durability, and track-proven performance.